Wire Harness

Took out the harness carefully as to have a reference point for when I buy the replacement harness.  There were pretty much no issues.

Hindsight being 20/20 – had I wanted to save some frustation, I should of first removed the radio grill and worked right to left pulling out the instrument clusters.  I instead stuck my head up under there with the pedals in my back and cursed lots.

IMG_0006.JPG IMG_0002.JPG IMG_0003.JPG IMG_0004.JPG IMG_0005.JPG

My headlight switch appears to be broken – the rheostat spring has broken off the rivit, I’ll give it a try before I drop $80 on a new one!

IMG_0006.JPG IMG_0007.JPG IMG_0010.JPG

While researching my heater switch, I’ve discovered that its not original.  I’ll likely replace it with an original.

IMG_0024.JPG IMG_0026.JPG

Not much to look at when you look at whats under the hood of a modern vehicle – but hey, its got only 1 brake light, no signal lights and only 3 sensors!  Gas, temp and oil pressure!

IMG_0031.JPG

3 thoughts on “Wire Harness

  1. My fuse blaock is the same as in your picture # 0005 JPG . It looks like there are wires on the bottom two screws did these go to the horn relay?

    Thanks

    Bennie

Leave a Reply

Your email address will not be published. Required fields are marked *